Product ID:WHITE VINYL FINISH, 97-250
MSDS Date:02/23/1989
FSC:8010
NIIN:00N026153
MSDS Number: BMRLD

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

ING 1. ANIMALS INHAL MASSIVE QTYS OF ING 1 DUST

RTECS: 9999999ZZ

INVOLVED IN MFR OF PIGMENT INDICATE NO INCR RISK OF

RTECS: 9999999ZZ

COATINGS IS VERY LMTD.SINCE OVEREXPS ARE NOT

RTECS: 9999999ZZ

ING 5. LONG-TERM INHAL STUDIES W/LAB ANIMALS ASSOC

RTECS: 9999999ZZ

CELLS, DECREASED LUNG VENT & O*2 CONSUMPTION.

RTECS: 9999999ZZ

PERSISTENT SKIN/EYE IRRIT OR BRTHG

RTECS: 9999999ZZ

DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST

RTECS: 9999999ZZ

STATED LIMIT, & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ

NITRILE RUBBER GLOVES.

RTECS: 9999999ZZ

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

(ORAL,RAT)4.3 G/KG.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 20-25%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE).

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 25-30%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

(ORAL,RAT)1.62 G/KG.

CAS: 108-94-1

RTECS: GW1050000

Fraction By Weight: 5-10%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

FILM FORMERS, RESINS AND ADDITIVES

Fraction By Weight: 15-20%

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE WATERING, HDCHS, NAUS, DIZZ
& LOSS OF COORD ARE INDICATIONS THAT SOLV LEVELS ARE TOO HIGH.
INGEST:HARMFUL/FATAL. EYE:CAUSES SEV IRRIT. REDNESS, ITCH, BURNING
SENSATION & VISUAL DISTURBS MAY INDICATE EXCESSIVE CNTCT. SKIN:MAY
CAUSE MOD IRRIT. MAY BE ABSORBED THRU SKIN. DRYNESS, ITCH,
CRACKING,(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:BURNING, REDNESS & SWELLING ARE CNDTNS
ASSOC W/EXCESSIVE CNTCT. INHAL:VAP & SPRAY MIST HARMFUL. VAP IRRITS
EYES, NOSE & THROAT. RPTD EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT OF
RESP SYS & PERM BRAIN & NERV SYS DMG. INTENT MISUSE BY DELIB CONC
& INHAL CONTENTS CAN BE HARMFUL/FATAL. CHRONIC:AVOID
LONG-TERM(SUPDAT)

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF H*2O
FOR @ LST 15 MIN. SKIN:FLUSH IMMED W/PLENTY OF H*2O FOLLOWED BY
WASHING W/SOAP & H*2O. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP &
OTHER S UPPORTIVE MEASURES AS REQD. OTHER:IF ANY OF FOLLOWING OCCUR
DURING/FOLLOWING USE OF PROD, CNTCT POIS CTL CTR, EMER ROOM/MD
IMMED. HAVE MSDS INFO AVAIL:INGEST, EXCESSIVE EXPOS TO CORR MATL,
(ING 12)

Flash Point Method:PMCC
Flash Point:57.0F,13.9C
Lower Limits:1.3%
Extinguishing Media:USE NFPA CLASS B EXTINGS(CO*2, DRY CHEM/UNIVERSAL
AQUEOUS FILM FORMING FOAM)DESIGNED TO EXTING NFPA CLASS IB (SUPP
DATA)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. H*2O SPRAY MAY BE INEFT. H*2O SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED
W/PROPER NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE
PERMITTED IN AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED
MATL W/SAWDUST, VERMICULITE/OTHER ABSORB MATL & PLACE INTO CNTNRS
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS IB FLAMM LIQS.
CNTNRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:AVOID FREE FALL OF LIQS IN EXCESS OF FEW INCHES. IF
MATL IS PART OF MULTIPLE COMPONENT COATING SYS, READ MSDS FOR OTHER
COMPONENT/COMPONENTS BEFORE BLENDING AS RESULTING MIXTURE MAY HAVE
HAZARDS OF AL L ITS PARTS.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C-)
PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE EXPOS.
READ RESP MFR'S INSTRUCTI ONS & LITERATURE CAREFULLY TO (ING 13)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGREDS Protective Gloves:POLYVINYL ALCOHOL, LATEX RUB/ (ING 15)
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:FLAMM LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN
EXPOSED TO EXTREME HEAT. IF H*2O IS USED, FOG NOZZS ARE PREF. EXPLO
HAZ:SURFS. TOX GASES MAY FORM WHEN PROD IS CNTCTED BY FLAME/HOT S
URFS. HAZ DECOMP PROD:INCL:CO, HCL CHLORINATED PRODS, CHLORINE.
EFTS OF OVEREXP:& RPTD CNTCT. PROD CONTAINS (INGRED 7)

HCC:F3
Boiling Pt:B.P. Text:>230F,>110C
Vapor Pres:14.8
Vapor Density:HVR/AIR
Spec Gravity:1.03
Evaporation Rate & Reference:156 (BUOAC = 100)
Solubility in Water:7.4%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS.
Percent Volatiles by Volume:82.5

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRON CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH APPROVED
WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.